Nickel-Plated Bent Threaded Heater 3000W
Available in stock
| Quantity | Price per unit | You save |
|---|---|---|
| 1–2 pcs | 9.200 Ft | — |
| 3–4 pcs | 8.740 Ft | 5% (−460 Ft/unit) |
| 5–10 pcs | 8.280 Ft | 10% (−920 Ft/unit) |
| 11+ pcs | 7.820 Ft | 15% (−1.380 Ft/unit) |
Nickel-plated 3000W Heating Element for Boilers and Industrial Tanks
Electric heating element with 32mm thread and bent tubular element, designed for efficient water heating in medium and large capacity boilers. Made of quality nickel steel, with corrosion protection and high temperature resistance, ensuring stable long-term operation. The ideal solution for replacing worn-out heating elements or upgrading to higher power.
What you get with this product
- Fast water heating — 3000W power ensures the desired temperature in a short time, even for 80-120 liter tanks
- Direct installation in the boiler — standard 32mm thread compatible with most commercial tanks, no modifications needed for mounting
- Superior durability — nickel tubular element resistant to limescale and corrosion, reliable operation for years
- Compact bent design — element length of 170mm allows installation in confined spaces without sacrificing contact surface with water
- Quick and economical replacement — an alternative to buying a new boiler, solves the problem of lack of hot water in under 30 minutes
- Standard 230V power supply — connects directly to the domestic electrical network, no need for three-phase installations
How it works and how to install it
The heating element screws directly into the 32mm threaded hole on the boiler flange, sealed with the included gasket. After emptying the tank and removing the old heating element, the new heating element is installed in the same place, secured, and the electrical connection is made via the screw terminal. The bent tubular element ensures uniform heat distribution throughout the entire water mass, without cold spots.
Frequently asked questions
Will it fit my boiler if it has a 1 and 1/4 inch thread?
Yes, the 32mm thread corresponds to the 1 and 1/4 inch standard used on most commercial electric boilers.
How much power does this heating element consume per hour during continuous operation?
At maximum power 3000W, the consumption is 3 kWh per hour, but in normal operation, the thermostat stops heating after reaching the set temperature.
Can I install the heating element myself, or do I need an authorized electrician?
The mechanical installation is simple, but the electrical connection must be made by a person with technical knowledge, respecting safety standards and prior disconnection of the power supply.
Technical specifications
| Nominal power | 3000W |
| Supply voltage | 230V |
| Total length | 300mm |
| Heating element length | 267mm |
| Bent section length | 170mm |
| Tube diameter | 8mm |
| Thread diameter | 32mm (1¼") |
| Element material | Nickel steel |
| Construction type | Bent tubular with thread |
Warranty and support
The product benefits from a 24-month warranty in accordance with Romanian legislation for manufacturing defects. 30-day return policy from receipt. Fast delivery by national courier with phone confirmation.
Couldn't load pickup availability
